Betco Ax-It Plus No-Rinse Stripper - Concentrate - 640 fl oz (20 quart) - 1 Each - Low Foaming, Rinse-free, Fast Acting, Versatile, Pleasant Scent, Residue-free - Clear, Amber
Get $2.30 back in Rewards
Estimated delivery between May 6 - May 8
Add to wishlist
This fast-acting floor finish liquefier will solve stripping difficulties caused by frequent high-speed burnishing, super-hard urethane fortified finishes or excessive buildup. It is designed to remove layers of floor finish in less time with less effort and no rinsing. Floors are ready to re-coat without neutralizing when used as directed. Use on hard-surface floors in a range of dilution ratios to do the job. Low-foaming formula is recommended for removing water-based acrylic floor finishes for all types of resilient tile and hard surfaces. Ax-it Plus is not recommended for stripping linoleum or sheet vinyl floors.
-
Features
Low Foaming Rinse-free Fast Acting Versatile Pleasant Scent Residue-free
-
Manufacturer
Betco Corporation
-
Manufacturer Part Number
154B500
-
Manufacturer Website Address
http://www.betco.com
-
Product Name
Ax-It Plus No-Rinse Stripper
-
Packaged Quantity
1 Each
-
Type
Floor Stripper
-
Recycled
No
-
Assembly Required
No
-
Country of Origin
United States
-
Application
Floor Hard Floor Tile Hard Surface
-
Product Line
Ax-It Plus
-
Cleaner Type
Concentrate
-
Composition
Water Butoxyethanol Potassium Hydroxide Ethanolamine Sodium Xylene Sulfonate Tetrapotassium Pyrophosphate Tetrapotassium EDTA Fragrance Poly (oxy-1 2-ethanediyl) Phosphate
-
General Item Color
Multicolor
-
Cleaner Volume
640 fl oz (20 quart)
-
General Item Color
Clear Amber
-
Cleaner Form
Liquid
-
pH
13.5 - 14
-
Directions/Instructions
Recommended ESIor removing water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Pre-test in a small area; color bleeding or discoloration may occur on linoleum rubber tile or asphalt tile. Not recommended for stripping linoleum or sheet vinyl floors. Sweep or dust mop the floor to remove any large debris. Dilute with warm to hot water. For normal stripping dilute 13 oz./gal. or 100 mL/L (1:10) of water. For heavy stripping dilute 25 oz./gal. or 200 mL/L (1:5) of water. Apply solution liberally to floor surface. Allow a minimum of 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine automatic scrubber or stripping machine. Pick up the solution with a wet vacuum an automatic scrubber or a mop and bucket and thoroughly rinse the floor. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. Please recycle empty container.
-
Commercial Use Type
Not Provided
-
Show more