Cube 3D Ultimate Edition by AdirPro
The AdirPro CUBE 3D laser is a cross line laser level. This unit is self-leveling with a vertical accuracy range of within 3°. The working range of this laser is up to 65’ (20m), depending on the work area’s illumination. The two separate line beams are generated from 635nm laser diodes. The line beams have ±2mm accuracy at up to 10m. Design The CUBE 3D laser level is a compact, practical option for basic cross line leveling work. Measuring at 2 5/83”, the laser can fit comfortably in the palm of your hand. It has a hard plastic housing to protect the laser beams and pendulum leveling system within. The housing has a ribbed rubber casing that protects it from scratches while giving extra friction to make it slip resistant. There are 3 separate laser beams, one horizontal and two vertical (90° offset from each other), with a maximum deviation (vertically) of just 3°.This allows for intersecting layouts that require right angles and vertical alignment on separate walls. It’s ideal for hanging shelves, pictures, or any wall ornament. It’s a great option to use while hanging wallpapers, placing electrical wiring conduits, as a guide for suspended ceilings, and the like. Leveling The CUBE 3D has a quick pendulum self-leveling system. Additionally, there is locking system that is automatically engaged when the laser is switched off to protect the system’s integrity during transportation. When turned on, the level will beep if it is out of leveling range. Mounting Options The CUBE 3D laser level has one mounting nut with a ¼” thread at the bottom of the unit. This allows you to mount it either to a bracket or a tripod for security. The unit can be placed on a regular surface, but securing it usually guarantees less movement for more accurate work. Accessories The CUBE 3D comes with a soft bag cover, a set of AAA batteries, and an instructions manual. When you purchase the Home Edition you get the universal mount added to the package. If you purchase the Professional Edition you get a telescoping tripod (up to 3' high) added to the package (instead of the mount). And when you purchase the Ultimate Edition you get both the mount and the tripod added to the package, along with laser glasses and an orange hard plastic case (instead of the soft bag cover) for the entire kit. This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at firstname.lastname@example.org, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.