Cube 2-360 Basic Edition by AdirPro
The AdirPro CUBE 2-360 laser is a cross line laser that has a pendulum level. This unit is self-leveling with a vertical accuracy range of within 4°. Depending on the work area’s illumination, the working range of this laser is up to 230’ (70m) with a target, and 65’ (20m) without a target. The two separate line beams are generated from 635-670nm laser diodes. The line beams have ±3mm accuracy at up to 10m. Design The CUBE 2-360 laser level is a compact, practical option for basic cross line leveling work requiring a 360° horizontal line beam. In order to switch between indoor/outdoor modes, use the button next to the power button. Measuring at 2 ½” x 3 ¼” (37/8” with the vertical beam’s housing) x 3 ¼” (37/8” with the horizontal beam’s housing), the laser can fit comfortably in the palm of your hand. It has a hard plastic housing to protect the laser beams and pendulum leveling system within. The housing has a ribbed rubber casing that protects it from scratches while giving extra friction to make it slip resistant. There are 2 separate laser beams, one horizontal and the other vertical. Both beams cover 360°. This allows for intersecting layouts that require right angles. It’s ideal for construction and repair work such as laying pavement or tiles. It’s a great option to use while hanging shelves, pictures, wall ornaments, hanging wallpapers, placing electrical wiring conduits, as a guide for suspended ceilings, and the like. Leveling The CUBE 2-360 has a quick pendulum self-leveling system. Both laser beams are leveled through the same pendulum. Additionally, there is locking system to ensure that the compensator does not shift during transportation due to vibrations. The switch has 3 settings. The first is when the unit is on and the leveling system is unlocked (this allows it to level automatically). The second is when the unit is on and the leveling system is locked (it will not level automatically). The third is when the unit is off and the leveling system is locked. Note: When the leveling system is unlocked, if the unit is out of leveling range it will beep to alert you. Mounting Options The CUBE 2-360 laser level has two mounting nuts with a ¼” threads; one at the back of the unit and the other on the bottom of the unit. This allows you to mount it either to a bracket or a tripod for security. The unit can be placed on a regular surface, but securing it usually guarantees less movement for more accurate work. Accessories The CUBE 2-360 comes with a set of AA batteries and an instructions manual. When you purchase the Ultimate Edition you get the batteries and instructions manual in addition to a soft case(for the actual laser unit), mount, tripod, laser glasses, and an orange hard plastic case (for the entire kit). This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at email@example.com, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.