Betco Finish 101 Acrylic Polymer Floor Finish - Concentrate - 640 fl oz (20 quart) - Mild ScentBag - White, Crystal Clear
Get $1.89 back in Rewards
Estimated delivery between May 9 - May 13
Add to wishlist
-
Scent
Mild
-
Manufacturer
Betco Corporation
-
Manufacturer Part Number
696B500
-
Manufacturer Website Address
http://www.betco.com
-
Product Name
Finish 101 Acrylic Polymer Floor Finish
-
Type
Floor Finish
-
Recycled
No
-
Assembly Required
No
-
Country of Origin
United States
-
Application
Floor Education Retail
-
Product Line
Finish 101
-
Cleaner Type
Concentrate
-
Composition
Bleach Chlorine
-
Recommended Use
Heel Mark Remover
-
Container Type
Bag
-
General Item Color
Multicolor
-
Cleaner Volume
640 fl oz (20 quart)
-
General Item Color
White Crystal Clear
-
Cleaner Form
Liquid
-
pH
8.1 - 8.9
-
Directions/Instructions
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. RESTORATIVE MAINTENANCE: Completely remove all old wax finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply floor finish in uniform thin to medium coats using a clean synthetic finish mop microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats usually 20 - 30 minutes. Elevated temperatures heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish however if tile is old worn or porous initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance. ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating. INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above. Please recycle empty containers. Note: Slip resistance meets or exceeds standard (ASTM D 2047-11) James Machine 0.5 minimum.
-
Commercial Use Type
Not Provided
-
Show more
