Ultimate Laser Wall Bracket by AdirPro
AdirPro's ultimate wall bracket gives you a mounting bracket with excellent workmanship from quality materials at an affordable price. The adjustable plate which the laser mounts upon gives you 4.25" from the mounting point. The actual mount is a screw knob. The threading of the screw is 5/8". If your tool's receiving thread is only 1/4" you can use the 5/8" to 1/4" adapter (765-12) to securely fix the laser to the bracket. To secure the bracket to the wall, all you need is two screws. Once attached, the bracket will stay flush against the wall for extra stability. The height of your laser can be adjusted in two ways. There's a spring release button for moving the laser in larger increments. For a more precise positioning, there is a knob at the bottom that can be turned to adjust the height of the laser to the exact position you need. The Ultimate Wall Bracket is backed by AdirPro's limited lifetime warranty. This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at firstname.lastname@example.org, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.