Multi Laser Wall Bracket (Steel) by AdirPro

Product ID:

825524

(0)
$44.65
Price Quote
when buying in bulk
List Price: $59.95
You Save: -$15.30 (-26%)
Price: $44.65 and get $0.40 back in Rewards
Out Of Stock
Notify me when available

The AdirPro 790-71 multifunctional wall bracket is just what you need to firmly secure your laser to a light steel wall or ceiling. It is designed for security and durability. The bracket can secure to a wall by using the 2 screw holes at the top of the bracket, or with the clamps beneath the lip of the brace. At the bottom of the bracket there is a screw knob to make the bottom flush with the securing surface so that it doesn't shift and remains secure. If the surface isn't flat, the knob is adjustable to accommodate uneven surfaces and ledges. Once the bracket is secured the laser can be attached firmly and adjusted both in the vertical and stacked positions. The screw knob that attaches the laser has a 5/8" thread. (If your laser has a 1/4" thread, you can use the 765-12 adapter.) The distance of the laser from the back of the bracket to the securing screw knob can be adjusted from 2.5"-5". The vertical height of the laser can be adjusted over a height of 8.375". There is a guide on the side of the bracket with increments of 24cm. To adjust, all you need to do is turn the locking knob counter clockwise, shift the position, and then turn the knob back clockwise as far as you can. The bracket itself is made of rugged steel and heavy duty plastic and is backed by AdirPro's standard limited lifetime warranty. Note: When using clamps to secure bracket, be sure the clamps are completely closed (you should feel them "click" into place). This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at customersupport@adircorp.com, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.

Sign Up for Special Savings!
Follow Us