FLAG 3 Laser Distance Meter by AdirPro
The AdirPro Flag 3 laser distance meter is the answer to having a one man measuring operation. It’s easy to use, and able to take measurements up to 328’ (100m) with an incredible accuracy of 1/16” (1.5 mm). Design The Flag 3 is designed with the measuring professional in mind. It’s small enough to fit in the palm of your hand and lightweight to make it comfortable to carry. It’s 4.92” x 2.09” x 1.30” (125mm x 53mm x 33mm) and weighs just 5.64 oz (160g). While made from sturdy plastic, AdirPro ensures extra protection with a rubber casing around the unit. The port for the USB transfer cable is protected with the rubber casing which is supple enough for easy access. The buttons are metal dome array with a lifetime of 500,000 times. The lithium-ion battery is in enclosed with a door that is secured with screws to guarantee that it does not slip. Built into the back of the unit is a ¼” thread nut to secure the meter to a stable surface. Accuracy The Flag 3 handheld distance measurer has a typical accuracy of ±1/16” over a range of 0.17’-328’ (0.05m-100m). Interface/Display The user-friendly interface of the Flag 3 unit is intuitive and hassle free. Additionally, the user manual goes through each button and function in depth in case of confusion. Measurements can be taken and read in meters, inches, feet, or feet and inches together. The LCD display is 1 ¼” x 1 ½” with a QVGA (320*240) resolution. There is a 4 line display. The backlight is adjustable through the “Brightness” section in the menu. It stores a memory of past measurements that can be scrolled through using the simple up and down arrows. Functions The Flag 3 meter from AdirPro is loaded with many functions which include: Auto calibration Auto shut off for the laser (30 seconds) Auto shut off for the instrument (180 seconds) Area/Volume Pythagoras Add/SSubtract Tilt/Auto Level Auto Height Staking Out Timer Thermometer Historical Data (1000 sets) Accessories The standard unit outfit includes the actual Flag 3 distance meter, a soft case with a belt loop, a mini screwdriver (for the battery door compartment), a USB transfer cable, a USB to outlet adapter, and a flash drive with the software needed. Protection As with most AdirPro’s products, the Flag 3 laser distance meter has a limited lifetime warranty. To extend the life of your battery, be sure to remove the battery before a long period of non-use. Be sure not to use aggressive cleaning agents on the unit. Make sure to store the unit in temperatures of 14°F-140°F (-10°C-60°C) and to use it in the range of 32°F-140°F (0°C-60°C). This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at firstname.lastname@example.org, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.