Extending Tripod Pole (5') by AdirPro
The AdirPro 5' pole extension is crafted from rugged materials in order to withstand the worksite environment. The 790-76 is a great option when looking to considerably extend the height of a tripod or pole. The pole extends a span of 26.75" (from 31.25"-58"). It attaches to both the tripod/pole and your unit with a 5/8" thread. If you need 1/4" threading you can use the 765-12 (from extending pole to unit) or the 765-13 (from tripod/pole to extender) simple to use adapters. (Note: The adapters will add a bit of height) The extending pole is not bulky at all. The outer section has a diameter of just 1.35". (Note: Measurements do not include the diameter of the locking system) The locking system is quick and easy to use. The pressure of the lock keeps the pole from telescoping down while it's locked. AdirPro backs this pole with their limited lifetime warranty. This product is warranted to the original purchaser, only, and is not transferable. If there is failure of product due to defects in material and workmanship, upon proof of purchase, AdirCorp®/AdirPro®/AdirMed® will repair or replace the product at our own discretion, without charge. Warranty is void if product is subject to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose, or if maximum load capacities are exceeded. This warranty does not cover chipping, flaking, scratches, rust, dents, or other damages to the finish or surface of the product. Responsibility of AdirCorp®/AdirPro®/AdirMed® is limited to repair or replacement of product at our discretion. AdirCorp®/AdirPro®/AdirMed® is not responsible for consequential, incidental, or other damages resulting from product failure. (THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. In case of product failure, (damaged or defective material), contact AdirCorp®/AdirPro®/AdirMed®, at firstname.lastname@example.org, 27 Selvage Street, Irvington, NJ 07111 or 845-738-1467.